1.1 Purpose of the manual


Operation manual
This operation manual will help you to become familiar with your ABB Turbo Systems Ltd turbocharger and to use it to full effect in its intended application. You will find important instructions as to the safe, correct, and economical operation of the turbocharger.

Target group
The content of this operation manual is intended for persons such as engineers, marine mechanics and service technicians who are responsible for the running of the engine and the turbocharger installed thereon.

Content of operation manual
This operation manual includes helpful information on the following topics:
  •   Information on the operation of the turbocharger and ways to prolong the turbocharger's service life.
  •    Early awareness and avoidance of hazards.
  •     Minimizing repair costs and failure times.

This operation manual is a complement to, and an extension of, existing national regulations on accident protection and prevention.

IMPORTANT

" An operation manual must be available at all times at the site where the turbocharger is used. It is essential that this operation manual is read before beginning work by all persons working with or on the turbocharger. Personnel who only work occasionally on the machine (e.g. during installation and maintenance) must also have read and fully understood the operating manual before beginning work. "

The instructions included in this operation manual must be followed under all circumstances.



WARNING

" This applies especially to the general and special safety instructions preceding and in the respective chapters. Ignoring hazards and the safety instructions can lead to serious personal injury and damage to equipment. "



          1. Purpose of the manual
          2. Layout and function
          3. Correct use of the turbocharger
          4. Essential information
          5. Abbreviations and symbols
          6. Turbocharger rating plate
          1. Basic safety instructions
          2. General safety instructions
          3. Special safety instructions
          4. Safety instructions and hazard protection
          5. Warnings on the turbocharger
          1. Oil supply
          2. Inspection work
          3. Putting into operation after laying up
          1. Servicing work
          2. Monitoring
          3. Emergency mode TPL..VA
          4. Surging of turbocharger
          5. Contact with rotating parts
          6. Shutting the engine down
          1. Foreword to MaintenanceServicing work
          2. Cleaning the filter silencer
          3. Cleaning the compressor during operation
          4. Cleaning turbines and guide blades in operation
          1. Possible remedies for failures
          1. Turbocharger weights
          2. Remove the turbocharger
          3. Installing the turbocharger
          1. Module weights
          2. Remove filter silencer/air suction branch and compressor casing
          3. Removing cartridge group
          4. Axial clearance
          5. Disassembling and assembling the turbine diffuser
          6. Dismantle the VTG unit together with the gas inlet casing
          7. Installing the VTG unit and gas inlet casing
          8. Installing the cartridge group
          9. Install filter silencer/air suction branch and compressor casing
          10. Table of tightening torques
          1. Possibilities for emergency repair
          2. Fitting the cover plate
          3. Blocking the inlets and outlets
          4. Bypass the turbocharger
          1. Taking out of operation for up to 12 months
          2. Taking out of operation for more than 12 months
          1. Ordering spare parts
          2. Directory of part numbers
          3. General view of turbocharger
          4. General view of cartridge group
          5. General view of VTG unit





Share on Google Plus

About shaikat

This is a short description in the author block about the author. You edit it by entering text in the "Biographical Info" field in the user admin panel.
    Blogger Comment
    Facebook Comment
Related Posts Plugin for WordPress, Blogger...

Featured Post

PID CONTROLLER 3-WAY TEMPERATURE CONTROL VALVE

A proportional-integral-derivative controller ( PID controller ) is a control loop feedback mechanism used in power and industrial con...

RECENT POSTS

Recent Posts Widget