2.1 Basic safety instructions


The following symbols and terms are used for the safety instructions in this manual:

WARNING

Failure to follow work steps and operating instructions marked with this symbol completely and rigorously may result in serious personal injury or even fatal accidents.

Warning signs must be strictly observed at all times.



CAUTION

Serious damage to the machine or to other property may result if the working and operation instructions marked with this symbol are not, or only partly, observed.


Caution signs must be strictly observed at all times.


          1. Purpose of the manual
          2. Layout and function
          3. Correct use of the turbocharger
          4. Essential information
          5. Abbreviations and symbols
          6. Turbocharger rating plate
          1. Basic safety instructions
          2. General safety instructions
          3. Special safety instructions
          4. Safety instructions and hazard protection
          5. Warnings on the turbocharger
          1. Oil supply
          2. Inspection work
          3. Putting into operation after laying up
          1. Servicing work
          2. Monitoring
          3. Emergency mode TPL..VA
          4. Surging of turbocharger
          5. Contact with rotating parts
          6. Shutting the engine down
          1. Foreword to MaintenanceServicing work
          2. Cleaning the filter silencer
          3. Cleaning the compressor during operation
          4. Cleaning turbines and guide blades in operation
          1. Possible remedies for failures
          1. Turbocharger weights
          2. Remove the turbocharger
          3. Installing the turbocharger
          1. Module weights
          2. Remove filter silencer/air suction branch and compressor casing
          3. Removing cartridge group
          4. Axial clearance
          5. Disassembling and assembling the turbine diffuser
          6. Dismantle the VTG unit together with the gas inlet casing
          7. Installing the VTG unit and gas inlet casing
          8. Installing the cartridge group
          9. Install filter silencer/air suction branch and compressor casing
          10. Table of tightening torques
          1. Possibilities for emergency repair
          2. Fitting the cover plate
          3. Blocking the inlets and outlets
          4. Bypass the turbocharger
          1. Taking out of operation for up to 12 months
          2. Taking out of operation for more than 12 months
          1. Ordering spare parts
          2. Directory of part numbers
          3. General view of turbocharger
          4. General view of cartridge group
          5. General view of VTG unit

Share on Google Plus

About shaikat

This is a short description in the author block about the author. You edit it by entering text in the "Biographical Info" field in the user admin panel.
    Blogger Comment
    Facebook Comment

0 comments:

Post a Comment

Related Posts Plugin for WordPress, Blogger...

Featured Post

PID CONTROLLER 3-WAY TEMPERATURE CONTROL VALVE

A proportional-integral-derivative controller ( PID controller ) is a control loop feedback mechanism used in power and industrial con...

RECENT POSTS

Recent Posts Widget