6.1 Possible remedies for failures (part-1)


Exhaust temperature too high
Engine output and speed unchanged

Engine
Troubles
Malfunction in the injection system
Remedies
Repair, or contact the manufacturer.


Turbocharger
Troubles
Air starvation, e.g. air filter clogged with dirt
Remedies
Clean
Troubles
Compressor / turbine soiled
Remedies
Clean
Troubles
Exhaust counterpressure too high
Remedies
Clean or repair boiler or exhaust silencer
Troubles
Turbine damaged or worn
Remedies
Contact an official ABB Turbo Systems service station.


Charge-air cooler
Troubles
Cooler soiled
Remedies
Clean
Troubles
Insufficient coolant water quantity
Remedies
Replenish
Troubles
Coolant water inlet temperature too hot
Remedies
Clean/inspect cooling system
Troubles
Ventilation inadequate
Remedies
Improve ventilation


          1. Purpose of the manual
          2. Layout and function
          3. Correct use of the turbocharger
          4. Essential information
          5. Abbreviations and symbols
          6. Turbocharger rating plate
          1. Basic safety instructions
          2. General safety instructions
          3. Special safety instructions
          4. Safety instructions and hazard protection
          5. Warnings on the turbocharger
          1. Oil supply
          2. Inspection work
          3. Putting into operation after laying up
          1. Servicing work
          2. Monitoring
          3. Emergency mode TPL..VA
          4. Surging of turbocharger
          5. Contact with rotating parts
          6. Shutting the engine down
          1. Foreword to MaintenanceServicing work
          2. Cleaning the filter silencer
          3. Cleaning the compressor during operation
          4. Cleaning turbines and guide blades in operation
          1. Possible remedies for failures
          1. Turbocharger weights
          2. Remove the turbocharger
          3. Installing the turbocharger
          1. Module weights
          2. Remove filter silencer/air suction branch and compressor casing
          3. Removing cartridge group
          4. Axial clearance
          5. Disassembling and assembling the turbine diffuser
          6. Dismantle the VTG unit together with the gas inlet casing
          7. Installing the VTG unit and gas inlet casing
          8. Installing the cartridge group
          9. Install filter silencer/air suction branch and compressor casing
          10. Table of tightening torques
          1. Possibilities for emergency repair
          2. Fitting the cover plate
          3. Blocking the inlets and outlets
          4. Bypass the turbocharger
          1. Taking out of operation for up to 12 months
          2. Taking out of operation for more than 12 months
          1. Ordering spare parts
          2. Directory of part numbers
          3. General view of turbocharger
          4. General view of cartridge group
          5. General view of VTG unit



Share on Google Plus

About shaikat

This is a short description in the author block about the author. You edit it by entering text in the "Biographical Info" field in the user admin panel.
    Blogger Comment
    Facebook Comment

0 comments:

Post a Comment

Related Posts Plugin for WordPress, Blogger...

Featured Post

PID CONTROLLER 3-WAY TEMPERATURE CONTROL VALVE

A proportional-integral-derivative controller ( PID controller ) is a control loop feedback mechanism used in power and industrial con...

RECENT POSTS

Recent Posts Widget