7.3 Installing the turbocharger


WARNING

During installation, a turbocharger that is not lifted in compliance with regulations may fall, and can cause serious or even fatal injury.
- If the bearing casing is not provided with a reinforced suspension lug, the complete charger must be  secured by the air outlet casing  and gas inlet casing.
- Select a suitable rope taking into account the weight of the turbocharger.
- Suspend the complete turbocharger using the two ribs provided for this purpose.


- Remove cover from the oil connector.
- Check the lifting equipment.
- Secure lifting equipment to the suspension lugs on the bearing casing.

If provided
- Secure the lifting equipment to the suspension lugs on the gas inlet casing (see illustration under removing the turbocharger).

CAUTION

Observe weight of the turbocharger.

- Mate turbocharger with the engine.
- Tighten the fixing screws on the foot, in accordance with the engine manufacturer's instructions.
- Mate the insulating shell with the bearing casing and secure.
- Secure all gas, air, and oil lines in accordance with the engine manufacturer’s instructions.


Share on Google Plus

About shaikat

This is a short description in the author block about the author. You edit it by entering text in the "Biographical Info" field in the user admin panel.
    Blogger Comment
    Facebook Comment

0 comments:

Post a Comment

Related Posts Plugin for WordPress, Blogger...

Featured Post

PID CONTROLLER 3-WAY TEMPERATURE CONTROL VALVE

A proportional-integral-derivative controller ( PID controller ) is a control loop feedback mechanism used in power and industrial con...

RECENT POSTS

Recent Posts Widget