1.3 Correct use of the turbocharger


" This turbocharger supplied by ABB Turbo Systems has been developed for use on diesel engines to generate the volume of air and the charging pressure required to operate the engine.

The engine manufacturer has provided ABB Turbo Systems with information regarding the intended purpose of the engine, from which the operating parameters specific to the turbocharger (such as rotating speeds, temperatures, replacement periods / exchange intervals) have been derived and are indicated on the rating plate.
If it is used in conjunction with a gas engine, the engine must not be installed in a potentially explosive environment, and precautionary measures must be taken to ensure that the machine room as a whole is classified as not potentially explosive.

 Any other usage shall be regarded as a special application which must be discussed with ABB Turbo Systems. The manufacturer accepts no liability for other applications. If it is used otherwise, ABB Turbo Systems reserves the right to reject all claims under the warranty. "

Latest technology

This turbocharger was built according to state-of-the-art technology and is operationally safe according to prevailing safety regulations.

" Improper operation and maintenance of the turbocharger can result in danger to life and limb of the user or third parties. In addition, improper use may cause damage to the machine. The machine may only be operated by trained personnel. "

Correct use of the turbocharger also includes observation of the assembly, disassembly, operating, maintenance and repair conditions specified by the manufacturer. Regulations set out by local authorities must be observed when disposing of the turbine.

Perfect condition
The turbocharger must only be installed in a technically perfect condition, corresponding to its intended purpose and following the instructions in the Engine Manufacturers' Manual, and must be operated and used in compliance with the Operation Manual.
  • Defects which could affect safety must be eliminated immediately.

The manufacturer shall not accept liability for damages resulting from unauthorized alterations to the turbocharger.

          1. Purpose of the manual
          2. Layout and function
          3. Correct use of the turbocharger
          4. Essential information
          5. Abbreviations and symbols
          6. Turbocharger rating plate
          1. Basic safety instructions
          2. General safety instructions
          3. Special safety instructions
          4. Safety instructions and hazard protection
          5. Warnings on the turbocharger
          1. Oil supply
          2. Inspection work
          3. Putting into operation after laying up
          1. Servicing work
          2. Monitoring
          3. Emergency mode TPL..VA
          4. Surging of turbocharger
          5. Contact with rotating parts
          6. Shutting the engine down
          1. Foreword to MaintenanceServicing work
          2. Cleaning the filter silencer
          3. Cleaning the compressor during operation
          4. Cleaning turbines and guide blades in operation
          1. Possible remedies for failures
          1. Turbocharger weights
          2. Remove the turbocharger
          3. Installing the turbocharger
          1. Module weights
          2. Remove filter silencer/air suction branch and compressor casing
          3. Removing cartridge group
          4. Axial clearance
          5. Disassembling and assembling the turbine diffuser
          6. Dismantle the VTG unit together with the gas inlet casing
          7. Installing the VTG unit and gas inlet casing
          8. Installing the cartridge group
          9. Install filter silencer/air suction branch and compressor casing
          10. Table of tightening torques
          1. Possibilities for emergency repair
          2. Fitting the cover plate
          3. Blocking the inlets and outlets
          4. Bypass the turbocharger
          1. Taking out of operation for up to 12 months
          2. Taking out of operation for more than 12 months
          1. Ordering spare parts
          2. Directory of part numbers
          3. General view of turbocharger
          4. General view of cartridge group
          5. General view of VTG unit

Share on Google Plus

About shaikat

This is a short description in the author block about the author. You edit it by entering text in the "Biographical Info" field in the user admin panel.
    Blogger Comment
    Facebook Comment


Post a Comment

Related Posts Plugin for WordPress, Blogger...

Featured Post


A proportional-integral-derivative controller ( PID controller ) is a control loop feedback mechanism used in power and industrial con...


Recent Posts Widget