The
outline of structure of SELFJECTOR is as shown below.
Driving
power from the motor is transmitted to the horizontal shaft through the
friction clutch. And the vertical shaft is accelerated by spiral gear installed
on the horizontal shaft and pinion gear on the vertical shaft.
The
vertical shaft is supported by upper and lower bearings and further the upper
and lower bearings are supported by springs.
The
bowl is installed on the top of vertical shaft and revolves at the revolution
speed of vertical shaft.
Furthermore.
SELFJECTOR is composed of the liquid contact parts such as feed liquid inlet,
light liquid outlet, heavy liquid outlet and the chute of discharging sludge,
etc. and frame and frame cover.
Also
a suction pump (gear pump) feeding dirty oil to SELFJECTOR is connected with
the horizontal shaft through safety joint. Further, for discharge of light and
heavy liquids, centripetal pumps (impellers) are installed respectively on the
top of bowl.
 |
| The outline of structure of SELFJECTOR |
 |
| Vertical shaft parts |
 |
| Horizontal shaft Parts |
No comments:
Post a Comment