Pages

▼
Showing posts with label Alfa Laval. Show all posts
Showing posts with label Alfa Laval. Show all posts
Wednesday, February 29, 2012

Discharge mechanism of Separator- Alfa Laval Separator

›
Sludge discharge i s performed as follows. Under centrifugal force acting on pilot valve, packing part is sealed and operating water i ...
4 comments:

Operating water supply equipment-Alfa laval Separator

›
To supply operating water for control of bowl sludge discharge to each water pressure chamber (water pressure chamber for opening bowl,...
3 comments:
Tuesday, February 28, 2012

Pump-Alfa Laval Separator

›
4.1 Gear Pump This pump is used as a suction pump to feed dirty oil to the purifier. It is connected via safety joint to the horizo...
1 comment:

Bowl- Alfa Laval Separator

›
The bowl is composed of bowl body, bowl hood and bow! nut which form a container. In the inside of bowl, the separation chamber compose...

Driving System- Alfa Laval Separator

›
2.1 Horizontal shaft parts Friction clutch is installed between motor and horizontal shaft to connect them. The horizontal shah is ...

Outline - Alfa Laval Separator

›
The outline of structure of SELFJECTOR is as shown below. Driving power from the motor is transmitted to the horizontal shaft through...
1 comment:

Definition of terms - Alfa Laval Separator

›
Density (p): Mass per unit volume, Specific gravity ( 7): . With mass of water per unit volume as 1, ratio of m...
1 comment:

Cautions in safety - Alfa Laval Separator

›
The bowl of SELFJECTOR revolves at high speed, causing great centrifugal force to act. As erroneous handling causes great danger, handle...
2 comments: