Recent Posts

2.4 Safety instructions and hazard protection-(part-3 -ABB TC

10:30 AM ,

Noise
The effects of noise above a legally permitted level can cause personal injury.

Personal injury
·         Loss of hearing
·         Deafness
·         Impaired hearing
·         Health disorders such as loss of balance or of consciousness
·         Cardiac and circulatory disturbances

Causes
·         Machine noise level above 85 dB (A) Protective measures
·         Wear ear protection
 .....................................................................................................................
Heat hazard
When the turbocharger is operated, surfaces become very hot.

Personal injury
·         Burns
Causes
·         Missing or incorrectly fitted insulation.
Protective measures
·         Wear leather protective gloves.

          1. Purpose of the manual
          2. Layout and function
          3. Correct use of the turbocharger
          4. Essential information
          5. Abbreviations and symbols
          6. Turbocharger rating plate
          1. Basic safety instructions
          2. General safety instructions
          3. Special safety instructions
          4. Safety instructions and hazard protection
          5. Warnings on the turbocharger
          1. Oil supply
          2. Inspection work
          3. Putting into operation after laying up
          1. Servicing work
          2. Monitoring
          3. Emergency mode TPL..VA
          4. Surging of turbocharger
          5. Contact with rotating parts
          6. Shutting the engine down
          1. Foreword to MaintenanceServicing work
          2. Cleaning the filter silencer
          3. Cleaning the compressor during operation
          4. Cleaning turbines and guide blades in operation
          1. Possible remedies for failures
          1. Turbocharger weights
          2. Remove the turbocharger
          3. Installing the turbocharger
          1. Module weights
          2. Remove filter silencer/air suction branch and compressor casing
          3. Removing cartridge group
          4. Axial clearance
          5. Disassembling and assembling the turbine diffuser
          6. Dismantle the VTG unit together with the gas inlet casing
          7. Installing the VTG unit and gas inlet casing
          8. Installing the cartridge group
          9. Install filter silencer/air suction branch and compressor casing
          10. Table of tightening torques
          1. Possibilities for emergency repair
          2. Fitting the cover plate
          3. Blocking the inlets and outlets
          4. Bypass the turbocharger
          1. Taking out of operation for up to 12 months
          2. Taking out of operation for more than 12 months
          1. Ordering spare parts
          2. Directory of part numbers
          3. General view of turbocharger
          4. General view of cartridge group
          5. General view of VTG unit

No comments

Subscribe to: Post Comments ( Atom )